MS-Control

This module has been designed to allow V/Oct CV and gate control of the Behringer K2 or the Korg MS-20 and has been tested on both. It also works well with the Behringer K2 Mk2 (see video).

V-TRIG or gate signals sent to the unit’s V-TRIG ins are converted to S-TRIG format at the outputs and can be sent directly to either of the TRIG-INs or the S/H clock of the K2 / MS-20. Two independent trig converters are included on the module to allow simultaneous patching.

Whilst the CV inputs of these synths do not work with the standard 1V/Oct CV control, the modulation inputs do. However, they are very difficult to calibrate which is where the CV part of this interface helps. Just plug the CV out of the MS-Control into one of the modulation inputs and turn the corresponding modulation level to maximum. It is then very easy to get perfect V/Oct control using the fine voltage adjustment on the MS-Control.

Note: please allow your synth to warm up for at least 15 mins before setting up the CV adjust on the MS-Control.

Purchase on eBay

Purchase at Pusherman

View on Modular Grid